NEW TUTORIAL " PURE & EROTIC LOVE "

This tutorial was written by Ali on the 15TH Of January 2010
This is my own creation and any resemblance to any other tutorial is purely coincidental.
Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:
2 Tubes of your choice, I’m using the wonderful work Keith Garvey
which you must have a license to use you can get one at his tubes HERE
Pure passion scrap kit made by me which you can by from HERE
Template #168 made by me which you can get from HERE

OK Have everything you need ? Lets get started.
Open up my template, press shift and D to duplicate and then close the original.
Delete my copy write layer now go to image and canvas size change to 800 x 800.
I like a large canvas to work on and we can always crop the tag once we have finished :o)
Ok this template has a few layers so it’s a lot of select, select none etc etc lol if your not using my scrap kit make sure you use another one with plenty of papers.

Select the bottom layer go to selections, select all, selections float, selections defloat.
Copy a paper of choice and position, once happy go to selections and invert now press delete on your keyboard.
Delete my bottom template layer.
Add a drop shadow.
Right as I said this template has a few layers lol so im going to leave you to do all the above to all of the other template layers.
Remember to use different papers and add a drop shadow to every layer.
Also remember to delete my template layers.

Once your happy with the way all your papers look make sure you have your top layer selected and copy and paste frame 1 as a new layer.
Resize look at above tag for ref.
Grab your freehand selection tool and select around the inner heart
Now copy and paste an image of choice and position.
Go to selections invert now press delete on your keyboard.
Drag your image layer under your tube layer.
Add a drop shadow to your frame layer.

As this frames comes with decorations already added I didn’t add that much to the tag because I didn’t want to over load it, but the choice is yours.

Copy and paste Green Flower Stem 1 as a new layer, Resize and place to the bottom left of your tag.
Add a drop shadow, right click on this layer and duplicate, now go to image and mirror.
Add this next to your other green stem, look at above tag for ref.

Copy and paste flower 3 as a new layer and resize
Place this flower to the bottom middle of the green stems.
Add a drop shadow.

Copy and paste Ribbon 2 as a new layer, resize
Now press ctrl & R on your keyboard this will bring up your free rotate settings.
Rotate this layer only to the left by 90%.
Place to the bottom of your tag under your flower layer.
Add a drop shadow.

Now copy and paste key 1 as a new layer.
Resize and sharpen and place this also to the bottom of your tag
Just above your ribbon layer.

Once your happy with the elements you have added its now time to add your main tube.
Copy and paste this tube and place to the far right of your tag.
Add a drop shadow.

Add all copy write now.

Add your name to your tag using your favourite font I used “ Inspiration size 90.

Add your favourite Gradient Glow setting and a drop shadow

Crop your tagAnd we’re all finished.

I hope you have enjoyed this very simple tutorial

All my love Ali-x-

NEW TUTORIAL " SOFT & SIMPLE "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 15TH Of January 2010
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp but should work in other versions.
Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU
　
For this tutorial you will need:
Image of your choice, I’m using the wonderful work of Zindy S.D. Nielsen which you must have a license to use you can get one at ZINDY ZONE
Toujours Et Pour Jamais scrap kit which was made by me and you can buy from HERE
WSL_Mask119. You Can Get Her Awesome Masks From HERE

Ok lets get started
Open a new image 800 x 800 dun worry we can re size later
Open one of my papers from the kit
Now go to layers, load/save mask, load mask from disc
Find Chelle’s mask WSL_Mask119 and press load
Right click on the top of your paper and copy merged
Back to your empty canvas right click on the top and paste as a new layer
Add a light drop shadow

Copy and paste frame 2 from the kit as a new layer.
Resize and place in the centre of your canvas.
Grab your freehand selection tool and select around the inside from this is where we will be adding our first picture.
Once selected copy and paste you image as a new layer, resize if needed, Once your happy go to selections and invert now press delete on your keyboard.
Go to selections and select none.
Drag your image layer under your frame layer.
You can now repeat these steps for the other 2 blank areas in the frame.

With your mask layer selected copy and paste “ Green Flower Stem 1 “ as a new layer, Resize and place just of to the right of your canvas look at above tag for placement.
Add a drop shadow.
Right click on this layer and duplicate
Now go to image and mirror.

With your mask layer selected copy and paste “ Sequins 2 “ as a new layer, Resize and position.
Right click on this layer and copy add these sequins a few times on your back mask layer, Look at above tag for ref.

With your top layer selected copy and paste “ Date Tag Bow 2 “ as a new layer.
Resize and position in the centre of your frame but at the bottom.
Look at above tag for ref.
Add a drop shadow.

Add all copy write now.

Add your name to your tag using your favourite font I used “ Inspiration size 90.
Add your favourite Gradient Glow setting and a drop shadow
Crop your tag
And we’re all finished.
I hope you have enjoyed this very simple tutorial
All my love Ali
-x-

NEW TUTORIAL " AUTUMN MEMORIES "

This tutorial was written by Ali on the 6th of September 2009
This is my own creation and any resemblance to any other tutorial is purely coincidental.Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:

Tube of choice, I have used the awesome work of Suzanne Woolcott you must have a license to use you can get one HERE

Autumn Memories made by me which you can buy from HERE or one of my stores.
BflyFlbyMask22 Which you can get from HERE

This is a very very easy tutorial but the results are beautiful hehe.
Ok lets get started.
Open a new blank canvas, size 800 by 800 dun worry we can resize later unless your like me who likes big tags lol.

Open one of the papers from the kitNow go to layers, load/save mask, load mask from disc Find BflyFlbyMask22 and press load.

Right click on the top of your paper and copy merged

Back to your empty canvas right click on the top and paste as a new layer
Add a light drop shadow.
Copy and paste Decorated Autumn Frame 1 as a new layer,

resize and place in the centre of your canvas.
Grab your selection tool set to rectangle and draw around the inside edge of your frame, once happy copy and paste an Autumn theme picture of choice as a new layer, resize and position.
Once happy go to selections and invert and now press delete on your keyboard.
Selections and select none.
Drag this layer under your frame layer.
Add a light drop shadow to your frame layer.

Copy and paste the twig and leaves 2 element as a new layer
Resize and then grab your deform tool and turn to the left till I looks straight.
Move this layer to your far right of your frame.
Now drag this layer under your frame layer and add a light drop shadow.

Right click on this layer duplicate, now go to image and mirror.
Repeat these steps so you have a leave frame around your main frame.
Look at above tag for ref.

Copy and paste Autumn cluster 1 as a new layer.
Resize quit small and move the bottom left of your tag.
Add a drop shadow.

Now for the cute part lmao copy and paste the Squirrel as a new layer and resize.
Once your happy with the size move it to the bottom left of your tag.
Copy and paste your tube as a new layer, if your using a tube like mine place it in the centre of your tag.
Add a light drop shadow.

ADD ALL COPYWRITE NOW.
Add your name to your tag and your favourite gradient glow setting to your name and we’re finished.

Here's another example using a different tube :o)

See how easy was that lol
I hope you have enjoyed my tutorial

All my love Ali-x-

NEW TUTORIAL " I DO BELIEVE "

This tutorial was written by Ali on the 24th of August 2009

This is my own creation and any resemblance to any other tutorial is purely coincidental.
Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:
Tube of choice, I have used a tube that came with Kirsty’s Kit.
I Do Believe In Faeries scrap kit made by Kirsty which you can buy from HERE
UFMask18 made by Sunf which you can get from HERE

Ok lets get started.
Open a new image 800 x 800 dun worry we can re size later

Open one of the papers from the kit
Now go to layers, load/save mask, load mask from discFind UFMask18 and press load.
Right click on the top of your paper and copy merged
Back to your empty canvas right click on the top and paste as a new layer

Add a light drop shadow.

Copy and paste frame 3 as a new layer, resize and position in the centre of your canvas.
Grab your magic wand tool and click on the inside blank bits of the frame, once happy go to selections modify and expand by 7.
Copy and paste a paper of choice and position, once happy to to selections, invert and press delete.
Move this layer under your frame layer.
Add a drop shadow to your frame layer.

Select your mask layer.
Now copy and paste leaves 2 as a new layer, resize and place just a little bit off to the left of your tag.
Add a drop shadow.

With your top layer selected copy and paste house 2 as a new layer, resize and place to the right of your frame.
Copy and paste the butterfly and snail as new layers, resize and place the butterfly to the top left and the snail to the top centre of your tag.
Add drop shadows.

Copy and paste grass 2 as a new layer resize and place one to the bottom left of your house, add a drop shadow.
Right click on this layer duplicate, now move it over the right of your house.
Look at above tag for ref.

Copy and paste ribbon 2 as a new layer, resize and place to the bottom of your tag
Add a drop shadow.

Copy and paste one of the fairies from the kit as a new layer and resize.
There’s a few to choose from and they are simply beautiful.
Place her to the left of your tag.
Add a drop shadow

ADD ALL COPY WRITE NOW.

Add your name to your tag and your favourite gradient glow

Setting and we’re all finished

Yayyyyyy lol I hope you have enjoyed my tutorial

All my love Ali-x-

NEW TUTORIAL " I KNOW WHAT YOU ARE "

This tutorial was written by Ali on the 31st of July 2009
This is my own creation and any resemblance to any other tutorial is purely coincidental.

Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:
Image of your choice, I’m using the wonderful work of Zindy S.D. Nielsen which you must have a license to use you can get one at ZINDY ZONE
I Know What You Are scrap kit made by Kirsty which you can buy from HERE
WSL_Mask105. You Can Get Her Awesome Masks From HERE

Ok lets get started

Open a new image 800 x 800 dun worry we can re size later

Open one of my papers from the kit

Now go to layers, load/save mask, load mask from disc

Find Chelle’s mask WSL_Mask105 and press load

Right click on the top of your paper and copy merged

Back to your empty canvas right click on the top and paste as a new layer

Add a light drop shadow

Copy and paste one of the glitter circles as a new layer,

re size and place in the centre of your tag.
Don’t forget to sharpen your glitter circle.

Copy and paste frame 1 as a new layer, re size and place in the centre of your tag.
Grab your magic wand tool and click on the inside of your frame
No go to selections, modify and expand by 5
Copy and paste your image of choice and position,

once happy go to selections invert and press delete on your keyboard.
Selections, select none.

Copy and paste the light sparkles tube as a new layer and position to the top centre of your tag.
Copy and paste the black rose as a new layer and re size.
Now place to the far left of you tag.
Add a drop shadow.

Right click on this layer and duplicate, now go to image and mirror.
Copy and paste flower 5 as a new layer,

re size and place under your left back rose look at above tag for ref.
You may need to grab your selection tool and delete some of the bottom stem.
Add a drop shadow.

Right click on this layer and duplicate, now go to image and mirror.
Copy and paste flower 8 as a new layer and re size and place to the far bottom left of your tag.
Add a drop shadow.

Right click on this layer and duplicate, now go to image and mirror.
Copy and paste flower 2 as a new layer, re size and sharpen
Place to the top centre of your tag.
Add a drop shadow.

Copy and paste the diamond as a new layer,

re size & sharpen and place on the top of your 2 rose stems,

look at above tag for ref.
Add a drop shadow.
Also place one in the middle of your top centre flower.

ADD ALL COPY WRITE NOW.

Add your name to your tag and your favourite gradient glow
Setting and we’re all finished
Yayyyyyy lol I hope you have enjoyed my tutorial
All my love Ali
-x-

Update :o)

Just wanted to le you all know

all new tutorials have been moved to my website woooot

tysvm Kirsty Mwahhhh luv ya honey.

Go HERE and click updates, that will show all my new ones :o)

Plus they all look better on white background lmfaoooo

All my love Ali

-x-

Ohhh P's thank you so much for your messages, means a lot to know

i still have my fans out there after all this time I've been away

i have missed you all and it feels amazing to be back

wooooooot hehe

Ali -x-

NEW TUTORIAL " SIMPLY BLACK & WHITE "

This tutorial was written by Ali on the 30th of July 2009

This is my own creation and any resemblance to any other tutorial is purely coincidental.

Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:

2 Tubes of your choice, I’m using the wonderful work Keith Garvey

which you must have a license to use you can get one at his tubes HERE

Simply Black & White Kit made by me which you can buy from HERE

Mask7UF made by Sunf which you can get from HERE

OK lets get started

Open a new image 800 x 800 dun worry we can re size later

Open one of my papers from the kit

Now go to layers, load/save mask, load mask from disc
Find Mask7UF and press load.

Right click on the top of your paper and copy merged

Back to your empty canvas right click on the top and paste as a new layer
Add a light drop shadow.

Copy and paste frame 10 as a new layer and place in the centre of your canvas.
Grab your magic wand tool and click on the inside of your frame, now go to selections, modify and expand by 5.
Copy and paste a paper of choice,
Now copy and paste a tube of choice once happy go to selections and invert, now press delete on your keyboard on your paper and tube layer.
Now go to selections, select none.
Drag your paper & tube layer under your frame layer.
Add a drop shadow to your tube and frame layer.

X out your background layer, right click and merge visible.

Un x your white background.

Now copy and paste Journal mat 1 and place above your background layer,

Add a drop shadow.

With your top layer selected copy and paste your main tube as a new layer and place to the right of your tag,

Add a drop shadow.

Copy and paste blossom 1 as new layer, resize and place to the left of your tag.

Add a drop shadow.

Copy and paste a bow of choice, resize and place to the bottom of your blossom flower.
Add a drop shadow.

Copy and paste on of the flowers from the kit, there’s a few to choose from lol and just decorate around the outside of your tag.
Make sure you add light drop shadows to your flower layers.

ADD ALL COPY WRITE NOW.

As you can see from my tag I have used the alpha that comes with the kit but your more than welcome to use a font of choice.

Once you’ve added your name we’re all done
Yayyyy lol
I hope you have enjoyed my tutorial
All my love Ali
-x-

NEW TUTORIAL " CUTIE "

This tutorial was written by Ali on the 30th of July 2009
This is my own creation and any resemblance to any other tutorial is purely coincidental.Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:
Image of your choice, I’m using the wonderful work Ismael Rac
which you must have a license to use you can get one at his tubes HERE

Font of choice, I used Inspiration.
Pretty In Pink Scrap Kit made by me which you can buy from HERE
UFMask18 made by Sunf which you can get from HERE

OK lets get started
Open a new image 800 x 800 dun worry we can re size later
Open one of my papers from the kit
Now go to layers, load/save mask, load mask from disc

Find UFMask18 and press load.
Right click on the top of your paper and copy merged
Back to your empty canvas right click on the top and paste as a new layer

Add a light drop shadow.

Grab your rectangle preset shape, background colour null foreground colour set to a colour from your tag, line width 12.60
Now draw out a frame which covers the frame on the mask.
Right click on this layer and convert to raster layer.
Add a texture of choice.
Grab your magic wand tool and click inside your frame, now go to selections, modify and expand by 5.
Copy and paste a paper of choice, now copy and paste a tube of choice as a new layer and position.
Once happy go to selections and invert press delete on your tube and paper layer.
Drag your paper layer under your frame layer and then drag your tube layer under your frame layer.
Add a drop shadow to your frame layer.

Copy and paste spotted ribbon 1 as a new layer, re size and place to the centre of your tag under your paper layer under your frame.
Look at above tag for ref.

Copy and paste the beads as a new layer, re size and place to the top left of your tag.
With your top layer selected copy and paste the lock and ribbon element as a new layer and re size so it fits length wise under your frame.
Add a drop shadow.

Copy and paste flower 2 as a new layer, re size and place to the top right of your tag.
You can of course add other elements of choice.

I added the cutie charm and then added the string :o)

Add all copy write now

Add your name to your tag and we’re all finished
Woooooot lol

I hope you have enjoyed my tutorial
All my love Ali
-x-

NEW TUTORIAL TWO HEARTS

This tutorial was written by Ali on the 29th of July 2009
This is my own creation and any resemblance to any other tutorial is purely coincidental.

Under no uncertain terms are you allowed to make money from anything produced from this tutorial, this is against my TOU

For this tutorial you will need:
2 Images of your choice, I’m using the wonderful work of Zindy Zone.
which you must have a license to use you can get one at her site HERE

Font of choice, I used Inspiration.
Two Hearts One Soul Scrap Kit Made By Laura Of Laura’s Designz which You Can Buy From HERE
WSL_Mask167. You Can Get Her Awesome Masks From HERE

Ok lets get started
Open a new image 800 x 800 dun worry we can re size later
Open one of my papers from the kit
Now go to layers, load/save mask, load mask from disc

Find Chelle’s mask WSL_Mask167 and press load
Right click on the top of your paper and copy merged
Back to your empty canvas right click on the top and paste as a new layer

Add a light drop shadow

Copy and paste Gems 1 as a new layer, resize and place to your top left and position, Once happy add a light drop shadow now right click on this layer duplicate, now go to image and mirror, image flip.

Copy and paste Line Of Hearts 1 as a new layer, resize and sharpen.
Place it to the top left of your tag, look at above tag for ref.
Add a light drop shadow.
Once happy right click on this layer duplicate, now go to image and mirror, image flip.

Copy and paste Ribbon 1 as a new layer or your more than welcome to choose another ribbon from the kit, resize and place in the centre of your tag, look at above tag for ref.
Add a drop shadow.

Copy and paste Cluster Frame 2 as a new layer.
Grab your magic wand tool and click on the inside of the first heart area to the left.
Now go to selections, modify and expand by 3.
Copy and paste your image as a new layer and position, once happy go to selections in invert now press delete on your keyboard.
Selections, select none.
Drag this layer under your frame layer.

Repeat these steps for your last heart area of the frame on the right.
Add a nice drop shadow to your frame layer.

Add All Copy Write Now.

Add your name to your tag, then add your favourite Gradient Glow Setting.
Add a drop shadow to your name layer and we’re finished.

Thank you so much for trying my tutorial
I hope you like your finished results
All my love Ali

-x-

NEW TUTORIAL " MY LITTLE PRINCESS "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 23rd Of July 2009
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp but should work in other versions.

TOOLS NEEDED
Images Or Tubes Of Choice
Font Of Choice
Mask Belongs To Chelle WSL_Mask215
Visit her blog HERE
Princess Tales Scrap Kit By Honoured Scraps Which You Can Buy From HERE

Ok lets get started.
Open a new image 800 x 800 dun worry we can resize later lol

Open one of the papers from the kit
Now go to layers, load/save mask, load mask from disc.
Find WSL_Mask215 and press load.
Right click on the top of your paper and copy merged.
Back to your empty canvas right click on the top and paste as a new layer.
Add a light drop shadow.

Copy & Paste Frame 12 as a new layer and re size by 70%
Grab your magic wand tool and click inside the first blank frame on the left.
Now go to selections modify and expand by 10
Copy and paste your image as a new layer and position.
Once happy go to selections and invert, now press delete on your keyboard.
Selections, Select none.
Drag this layer under your frame.

Repeat these settings for the empty frame area on the right.
Once your happy with your results add a light drop shadow to your frame layer.

Copy and paste blossom 3 as a new layer resize by 70% and drag under your image layers.
Add a drop shadow.
Right click on this layer and duplicate, now move your 2nd blossom layer over to the right a little bit.
Merge your 2 blossom layers together no duplicate this layer
And go to image flip image mirror, you may need to move it around a little bit to make it match the same area as your other one.

With your very top layer selected copy and paste bling 1 as a new layer, re size by 70% and position, look at above tag for ref.
Now chop off any overlapping bits that you don’t want
Again look at above tag for ref.
Now go to Adjust sharpness & sharpen.
Add a very light drop shadow.

Time to decorate our tag

Copy and paste one of the bows as a new layer re size and place to the top left of your tag.
Add a drop shadow.

Copy and paste rose 3 as a new layer and re size by 30%
Place this one to the top right of your tag.
Add a drop shadow.

Duplicate this layer and re size by 60%
Place this rose to the top middle of your tag.
I repeated these steps 2 or 3 times and placed the roses in different areas of my tag, but its up to you, the kit has plenty of flowers to choose from.

Copy and paste Unicorn 4 as a new layer and resize by 40% no go to image and mirror and place to the bottom right of your tag.
Add a drop shadow.

If you have used Artists work ADD ALL COPY WRITE NOW.

Add your name to your tag and your favourite gradient glow setting,
Add a drop shadow.
Crop & resize we’re all done.

I hope you have enjoyed my tutorial
All my love Ali
-x-

NEW TUTORIAL " DARK ANGEL FROM ABOVE "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 23rd Of July 2009
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp but should work in other versions.

TOOLS NEEDED
Tube Of Choice.
Image Of Choice.
Mask By Chelle WSL_Mask256 Get Her Awesome Masks From HERE
Gothica Scrap Kit + Extras By Me Designs By Ali Which You Can Get From HERE

Ok lets get started.
Open a new image 800 x 800 dun worry we can re size later lol

Open one of my papers from the kit.
Now go to layers, load/save mask, load mask from disc.
Find Chelle’s mask WSL_Mask256 and press load.
Go to layers and merge visible.
Now grab your rectangle selection tool and select a rectangle size part of the mask.
Look at above tag for ref.
Once happy copy your selection, Back to your blank canvas and paste as a new layer.

This is where you get to choose which ribbon you would like to use lol.
You get loads of elements in this kit.
Ive used DBA 3 Ribbons 2 and selected the gray one.
Copy and paste the ribbon as a new layer and then re size by 70%
Don’t forget to sharpen your ribbon once you have re sized.
Move this layer to the top of your rectangle mask area.
Add a drop shadow.

Right click on this layer and duplicate.
Now go to image and flip.
Merge these 2 layers together.
Grab your rectangle selection tool and select the ends of the ribbon which are overlapping the mask area.
Once happy press delete, selections, select none.

Copy and paste another ribbon as a new layer.
Ive used Goth Ribbon 2
Place this ribbon below your first ribbon.
Add a drop shadow.
Right click on this layer and duplicate, now go to image and flip.
Grab your rectangle selection tool and select the ends of the ribbon which are overlapping the mask area.
Once happy press delete, selections, select none.

Copy and paste wings 1 as a new layer and re size by 55%
Move to the top middle of your tag.
Add a drop shadow.

Copy and paste frame 1 as a new layer and re size by 55%
Place in the middle area of your tag and wings.

Grab your magic wand and click on the inside of your circle.
Now go to selections modify and expand by 10.
Copy and paste a paper of choice now go to selections and invert
Press delete on your keyboard, selections, select none.
Drag this layer under your frame layer.
Add a drop shadow to your frame layer.

Copy and paste the Skull Bow 1 as a new layer and place in the centre bottom of your tag.
Re size by 70%, You may need to trim your ends just a tiny bit.
Add a drop shadow.

Copy and paste your tube as a new layer and place below your skull
Bow 1 layer, Half tubes work best for this tutorial.
Add a drop shadow.

ADD ALL COPY WRITE NOW.

Add some sort of saying to the bottom of your tag, I added
“ Dark Angel From Above “
Add a drop shadow.

Add your name to the left and right of your tag, look at above tag for ref.
Add a drop shadow and we’re all finished.

Thank you so much for trying my tutorial.
I hope you like your finished results.
All my love Ali
-x-

NEW TUTORIAL " GLAM ROCK "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 22nd Of July 2009
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp but should work in other versions.

TOOLS NEEDED

Tube Of Choice.
Image Of Choice.
Mask By Chelle WSL_Mask84 Get Her Awesome Masks From HERE
Glam Rock Scrap Kit By Me Designs By Ali Which You Can Get From HERE

Ok lets get started.
Open a new image 800 x 800 dun worry we can resize later lol

Open one of my papers from the kit.
Now go to layers, load/save mask, load mask from disc.
Find Chelle’s mask WSL_Mask84 and press load.
Right click on the top of your paper and copy merged.
Back to your empty canvas right click on the top and paste as a new layer.
Resize by 90%
Add a light drop shadow.

Copy and paste Frame 2 as a new layer and resize by 99%.
Grab your magic wand tool and click on the inside of the frame,
Now go to selections, modify and expand by 10
Now copy and paste your image as a new layer.
Go to selections and invert and now press delete on your keyboard.
Selections, Select none.
Drag this layer under your frame layer.
You can now add a drop shadow to your frame layer.

Copy and paste a tube of choice and place to the far right of your tag.
Add a drop shadow.
Copy and paste bow 1 as a new layer.
Re size by 30% and place to the top left of your tag.
Add a drop shadow.

Open DBA Word Art 2
Select one of the Girls Rock word art colour of your choice.
Paste as a new layer, Drag below your tube layer.
Now select your raster deform tool
Press your shift button and at the same time pull your bottom
Left and bottom right sides out, just to make it look like your tube
Is sitting on the word art.
Once happy add a drop shadow of choice.

Copy and paste one of the staples and place 2 or 3 around the outside of your tag, remember to sharpen if you resize.
Look at above tag for ref.
Add a drop shadow to your staples.

Now select your frame layer.
You will see a black are where we can add some text.
Add text of choice I added the word Rock !!!!

Copy and paste the speakers from my kit as a new layer,
Re size by 40% now go to image and mirror and place to the bottom left of your tag.
Add a drop shadow.

ADD ALL COPY WRITE NOW

Add your name to your tag and your favourite gradient glow setting
Colour set to some sort of lime green to match the kit.
Add a drop shadow to your name layer & we’re all finished.

Thank you so much for trying my tutorial.
I hope you like your finished results.
All my love Ali
-x-

NEW TUTORIAL " IMMORTALILTY "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 22nd Of July 2009
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp but should work in other versions.

TOOLS NEEDED
Image Of Choice.
Scrap Kit “ Fatal Attraction “ By Designs By Ali
You Can Get It HERE
Mask Of Choice, I used One Of Chelle’s Awesome Masks
WSL_Mask106. You Can Get Her Awesome Masks

From HERE

OK lets get started.
Open a new image 800 x 800 dun worry we can re size later lol.

Open one of my papers from the kit.
Now go to layers, load/save mask, load mask from disc.
Find Chelle’s mask WSL_Mask106 and press load.
Right click on the top of your paper and copy merged.
Back to your empty canvas right click on the top and paste as a new layer.
Add a light drop shadow.

Now open DBA Cluster Frame 2
Copy and paste as a new layer.
Re size by 80%
Now go up to adjust, sharpness and sharpen, I use this setting
Every time I re size something in psp makes them diamonds glitter again lol.

Ok grab your freehand selection tool and select around the diamonds, or you could use your magic wand but its quicker this way as the frame has a drop shadow on it.

Now copy and paste your image as a new layer
now go to selections, invert and press delete on your keyboard.
Selections, select none.
Drag this layer under your frame layer.

As the frame came with a drop shadow we do-not need to add one.

Copy and paste the Green Flower Stem from my kit as a new layer.
Re size by 35%, Place this layer under your frame layer and to the bottom left of your tag.
Add a drop shadow.
Right click on this layer & duplicate.
Now go to image and mirror.
Drag your duplicated layer above the frame layer.

Copy and paste Ribbon 2 from my kit as a new layer
Re size by 45%
Add a drop shadow and then drag this layer under your duplicated green flower stem layer.

Copy and paste music notes 1 from my kit as a new layer.
Add a drop shadow
Now drag this layer under your image layer.

Copy and paste the diamond as a new layer and decorate the outside of your tag.
Don’t forget to re sharpen your diamonds if they have been re sized.
Add a light drop shadow to your diamonds.
Copy and paste flower 2 as a new layer and re size by 20%
Place this layer on top of your duplicated green stem layer.
Add a light drop shadow.

Copy and paste word art 2 as a new layer
Re size by 50%, remember to sharpen your word art layer as we have re sized it.
Move to the bottom of your tag.
Add a drop shadow.

Add All Copy write NOW.

Add your name to your tag and your favorite Gradient Glow setting.
Add a drop shadow to your name layer and we’re finished.

Thank you so much for trying my tutorial.
I hope you like your finished results.
All my love Ali
-x-

NEW TUTORIAL " JUST WAITING "

This Tutorial Was Written By Ali ( Designs By Ali ) On The 22nd Of July 2009
Any Similarity to any other tutorial is purely coincidental.
This tutorial was written in psp9 but should work in other versions.

TOOLS NEEDED
Tube Of Choice,
Image Of Choice,
Font Of Choice,
Mask Made By Chelle, Download Her Awesome Masks HERE
Fatal Attraction scrap kit made by myself which you can buy from HERE

There Are No Supplies For This Tutorial.

Ok lets get started.
Open a new image 800 x 800 dun worry we can resize later lol
Open one of my papers from the kit.
Now go to layers, load/save mask, load mask from disc.
Find WSL_Mask75 and press load.

Right click on the top of your paper and copy merged.
Back to your empty canvas right click on the top and paste as a new layer.
Add a light drop shadow.

Open my cluster frame 1, now copy and paste as a new layer on to your canvas.
Resize by 80%.

Grab your freehand selection tool and select the inner part of the frame.
If you zoom in a bit its easier to see the string we need to select.

Now copy and paste your image as a new layer
now go to selections, invert and press delete on your keyboard.
Selections, select none.
Drag this layer under your frame layer.

Copy and paste the moon as a new layer and resize by 30%
Now place to the top left of your tag.

Copy and paste your main tube as a new layer and place to the right of your tag.
Add a drop shadow.

Its up to you weather you want to decorate your tag a bit more with some elements.
Ive added of green stems and some flowers.

Remember to add a light drop shadow to your elements.
Add all copy write now.

Add your name to your tag and a drop shadow and crop & resize we’re all done.
I hope you have enjoyed my tutorial
All my love Ali
-x-

JUST FYI

My tutorials will be posted here until my new home is ready

wooooooooooooooooot i have a very very special young lady Kirsty who is helping me get my tutorials back up, Yayyyyyyyyyyyyyyyyy I've so missed this side of it and i cant wait.

Thanks for reading

All my love Ali

-x-

Welcome Everyone :o)

Well its been a very very long time since i wrote my last tutorial

just over a year but i am looking forward to writting some new ones

for you all.

I have recieved some mail about will i be adding my old tutorials and for now the answer is no lol

i have over 200 tutorials and at this time i just dont have the time, but hayyyy i will be writting new ones so thats soooooo much better hehe.

Have fun and i hope you enjoy what i make, i would love for you to send me results of my tutorials.

All my love Ali

-x-